The frequent occurrence of LNG leakage accidents has caused serious economic loss and environmental damage. Experiments and simulations can be combined to obtain the transient process of LNG leakage and diffusion. This paper analyzed LNG leakage diffusion rules with experiment results obtained by depleting 1.4t LNG. The vapor clouds and LNG concentration are measured, which can be a comparison with the simulation results. Computational fluid dynamics and gas diffusion theory were chosen as the theoretical basis, simulating the transient process of LNG gasification to obtain the diffusion concentration rules. The simulation of LNG diffusion is divided into two parts: LNG leakage at the source and atmospheric diffusion. The maximum concentration of methane in the experiment was 4.1%, and the maximum concentration in the simulation was 4.6%. The results show good agreement of the deviation statistics, which fall in the standard recommendation value range. Then we make a prediction of the dangerous concentration area and the flammability hazard zone of LNG leakage accident. The simulation results show that the range of the lower wind direction danger area firstly increases and then decreases, and the maximum distance of IDLH increases firstly and arrived at the peak of 52 m at 300s. 相似文献
Quantitative risk analysis (QRA) has been widely used to conduct the assessment of offshore accidental risks. However, the accuracy and validity of QRA is significantly affected by uncertainties when subjective judgments are involved. Therefore, it is unrealistic to determine the probability of a hazardous event by using one single explicit value when safety experts have a relatively low confidence level in their judgments. This paper proposes a new methodology for incorporating uncertainties into conventional QRA using the concept of confidence level. Offshore hydrocarbon release hazards are focused on and a barrier and operational risk analysis (BORA-Release) method is selected as the basic model to illustrate the proposed methodology. A left–right (L–R) bell-shaped fuzzy number is employed and its membership curve is able to control its shape to represent different confidence levels. As to the complex geometry of the bell-shaped fuzzy number, an α-cut operation is introduced to conduct the arithmetic operations of the fuzzy number, and a defuzzification method with total integral value is chosen to match the α-cut operations and acquire complete information for the fuzzy numbers. In the meantime, an optimism index is used to describe the attitude of the decision-maker. One case study is provided in this paper to demonstrate the implementation of this method. 相似文献
IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization. 相似文献
AbstractObjective: Advanced driver assistance systems (ADAS) are a class of vehicle technologies designed to increase safety by providing drivers with timely warnings and autonomously intervening to avoid hazardous situations. Though laboratory testing suggests that ADAS technologies will greatly impact crash involvement rates, real-world evidence that characterizes their effectiveness is still limited. This study evaluates and quantifies the association of ADAS technologies with the likelihood of a moderate or severe crash for new-model BMWs in the United States.Methods: Vehicle ADAS option information for the cohort of model year 2014 and later BMW passenger vehicles sold after January 1, 2014 (n?=?1,063,503), was coded using VIN-identified options data. ADAS technologies of interest include frontal collision warning with autonomous emergency braking, lane departure warning, and blind spot detection. BMW Automated Crash Notification system data (from January 2014 to November 2017) were merged with vehicle data by VIN to identify crashed vehicles (n?=?15,507), including date, crash severity (delta V), and area of impact. Using Cox proportional hazards regression modeling, the study calculates the adjusted hazard ratio for crashing among BMW passenger vehicles with versus without ADAS technologies. The adjusted percentage reduction in moderate and severe crashes associated with ADAS is interpreted as one minus the hazard ratio.Results: Vehicles equipped with both autonomous emergency braking and lane departure warning were 23% less likely to crash than those not equipped (hazard ratio [HR]?=?0.77; 95% confidence interval [CI], 0.73–0.81), controlling for model year, vehicle size and body type. Autonomous emergency braking and lane departure warning generally occur together, making it difficult to tease apart their individual effects. Blind spot detection was associated with a 14% reduction in crashes after controlling for the presence of autonomous emergency braking and lane departure warning (HR =0.86; 95% CI, 0.744–0.99). Differences were observed by vehicle type and crash type. The combined effect of autonomous emergency braking and lane departure warning was greater in newer model vehicles: Equipped vehicles were 13% less likely to crash (HR =0.87; 95% CI, 0.79–0.95) among 2014 model year vehicles versus 34% less likely to crash (HR =0.66; 95% CI, 0.57–0.77) among 2017 model year vehicles.Conclusion: This robust cohort study contributes to the growing evidence on the effectiveness of ADAS technologies. 相似文献
Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.
Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.
Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.
Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design. 相似文献